350BSB

Medium Duty Slider Bed Belt Conveyor

Specifications

Belting: PVC-120 black.

Drive Pulley: 4" dia. with 1-3/16" dia. shaft or 8" dia. with 1-7/16" dia. shaft, both crowned and fully lagged.

Tail Pulley: 4" dia., crowned, with 1-3/16" dia. shaft.

End Drive: Allows one-direction (unit) operation; add optional center drive for reversible application.

Take-Up: Screw type unit at tail pulley provides 12" belt take-up.

Bed: 3-5/8" deep x 12 ga. box type construction.

Bearings: All pulley bearings are precision, heavy duty, lubricated, ball bearing units with cast iron housings.

Belt Speed: 60 FPM, constant.

Return Rollers: 1.9" dia. x 16 ga. steel, model 196S, adjustable.

Floor Supports: SM-6 with 4" dia. end drive adjustable 31-3/4" to 40-1/4" TOB. SM-6 with 8" dia. end drive adjustable 33-3/4" to 40-1/4" TOB. Supports provided at both ends and each bed joint. Supports should be lagged to floor.

Motor Drive: 1/3 HP, 230/460/3, 60 cycle, ODP right angle gear motor.

Roller Chain: Drive pulley is driven
by No. 50 roller chain for 1-1/2 HP or less and No. 60 chain on larger drives. Chain take-up provided on motor base.

Electrical Controls: Optional

24 Hour Shipments Include All 1-Foot Increments 5'- 0" TO 100'- 0"

Warning: Prevent pinch points that exist when belt conveyors are permanently attached to other conveyors! Use connector brackets with safety pop out roller (other stationary equipment will require proper guarding and safety devices supplied by others).

Back to Top