796LSC

Line Shaft Driven Curve Module

Specifications

Tread Rollers: 2-1/2" dia. to 1-11/16" dia. x 14 ga. steel tapered rollers, model 254T.

Drive Belt: 3/16" dia., polyurethane belts. Nominal 15 lbs. per roller drive.

Drive Shaft: 1" dia. C1018 cold rolled steel shaft, located on inside radius. Note: Spools are keyed to provide positive drive (designed not to slip on drive shaft).

Couplings: Couplings located both ends (type "A") or one end only (type "B" or "C"). See 'line shaft curve couplings' and specify.

Tangents: 1'-0" both ends on 60° and 90°; 1'-6" both ends on 30° and 45°. 1'-0" infeed, 1'-0" discharge and no center tangent on 180°. Tangent roller centers 3" RC.

Bearings: Precision, lubricated, ball bearing units with steel housings. 6 per 90° and 60° curve; 4 per 45° and 30°.

Universal Joints: 4 per 90° and 60° curve; 2 per 45° and 30° curve.

Floor Supports: SM-6 adjustable 31-1/2" to 43-1/2" TOR. Supports should be lagged to floor.

Bed: 7" x 1-1/2" x 12 ga. formed steel channel frame.

Motor Drive: Driven by 796LS.

24 Hour Shipments Include 30°, 45°, 60° And 90° Modules

Back to Top